Thermostat Command – programmable



  • Sleek and stylish control unit
  • Easy to program
  • Simplify electrical wiring
  • Custom programming or pre-programming
  • Two operating modes (automatic or manual)
  • High-precision soil sensor
  • Two temperature sensors (floor probe and remote thermostat control)
  • Protection in the event of a fault is provided by an earthed differential circuit breaker
  • Reading modes: °C or °F, 24 hours or 12 hours
Power: 120/240 V AC, 50/60 Hz
Maximum load:
Class A (5 mA release)
Power supply: 1 800 W à 120 VAC 3 600 W à 240 VCA
Earth circuit breaker: Class A (5 mA trigger)
Display range: 0 à 60°C (32 à 140°F)
Adjustment range: 4 à 37°C (40 à 99°F)
Precision: -17 °C (± 0,9 °F)
Storage temperature: -17 à 49°C (0 à 120°F)
Sensor: Thermistor, 10k NTC, double insulation
Memory: Programming retained indefinitely. The time and date must be reset if the power is out for more than 30 minutes.
Approvals: ETL, Control No. 3037530 Compliance with UL 873, UL 943, CSA C22.2 No. 24 and CAN/CSA C22.2 No. 144

If you have a large room requiring a system over 15A, we recommend installing slave units. Slave units are specially designed to avoid the installation of numerous thermostats. Each expansion unit controls its section of floor and receives its instructions from the main thermostat. This allows a single thermostat to cover large rooms requiring a system of more than 15 A (maximum of 9 slave units per thermostat).